Since 2016 we've been building PLC, HMI and SCADA solutions across food & beverage, water treatment, energy and agriculture lines. From the panel to the software, from design to commissioning — every step is ours.
Turnkey automation. From tender preparation to commissioning, from panel manufacturing to the SCADA screen — the whole process under one roof.
Wafers moving on precision wire belts pass through a chocolate curtain to be enrobed; every motor is drive-controlled and temperature is held to 0.1°C via PID control and an SSR relay. All drives communicate over Profinet.
In this German-built sand reclamation system, sand passes through a magnetic drum to be stripped of metal fragments, then routed to a crusher and sand feeder. The panel layout and control software were modernized from scratch.
Two sand filters pre-treat the water alongside a 4-tank softening line; four reverse-osmosis units bring conductivity to 0-2 µS/cm, and 10 EDI units then reach the 0.05 µS/cm required for the turbines. Panel and software are entirely ours.
At a facility where municipal solid waste is irrigated and digested to generate electricity from the resulting gas, the leachate treatment and release process is monitored end-to-end from a SCADA screen we built.
Product in 6 oil tanks is calculated and tracked in kilograms from density, temperature and volume. Built on a Siemens PLC and a Raspberry Pi server, the system logs history and can be viewed from any device.
In a machine where 4 synchronized belts speed up and slow down together, compressors and blowers cool the product with precise temperature algorithms. Exported to Colombia, the software is entirely ours.
Two large storage and transfer tanks built for Nestlé combine tanker filling, holding chocolate at the required temperature, and load-cell-guided precision transfer at the exact weight needed.
A first for Turkey: built in 2023 for a cold-brew coffee brand, this machine seals hygienic aluminium caps onto 6 cans at once, using precision servo motors and PID-controlled heating elements.
BGC Tarım's long-idle pallet stacking machine was modernized. Jarred dried tomatoes are arranged 14×20 and stacked onto pallets with a magnet, ready for shipment.
Also modernized for BGC Tarım, this tunnel sterilizes jarred dried tomatoes on a drive-controlled belt through an 80°C steam tunnel. The panel was built from scratch, software entirely ours.
Our own product: fully automatic boom operation for bench-top seedling greenhouses. Addressing lets it water the chosen zone with the exact amount needed — saving labour and time.
Raw milk delivered by tanker is heated and pasteurized, then cooled to 5°C into a holding tank. Cleaned with a CIP wash after every batch, the process is controlled by temperature, flow and conductivity sensors.
At CMS, raw water passes through sand and carbon filters into anion-cation tanks. Two tandem lines keep production running 24/7 — one stays in production while the other regenerates.
The panel and automation software for this drive-controlled Reverse Osmosis + NF industrial water treatment line were built by us.
A water purification system spanning sand filtration, carbon filtration, softening, reverse osmosis and EDI, designed and commissioned to supply the process water the biomass plant needs.
Every project starts with panel manufacturing. From design to assembly, from testing to the field, every panel is built in our own workshop.
Let's talk about your panel manufacturing, PLC/HMI/SCADA software and turnkey automation projects.
Get in touch →